Three practical routes from room-level data to building supervision.
Connect Koolmesh lighting, sensors and room devices to established BMS environments through Bluetooth gateways, LoRaWAN or a FIN-based supervisory controller.
ROUTE 01
Bluetooth to Multi-Protocol BMS Route
Koolmesh Bluetooth-to-BMS gateway integration makes the lighting network BMS-ready.
Lighting-control and sensor data
◉Occupancy
☀Daylight
↗Energy
▥Device status
≡Control
→
MULTI-PROTOCOL OUTPUT
→
BMSHMIPLC
One gateway. Multiple open protocols.
Supports BACnet, MQTT and Modbus.
Transmits field-device data to BMS platforms in real time.
Provides a built-in IP Web UI for configuration, monitoring and remote management.
Allows the lighting system to interoperate with wider building controls.
INSTALLATION
Designed for the control cabinet
Power supply5V DC / 3A
Power portUSB Type-C
MountingStandard DIN rail (35 mm)
Integration path
Koolmesh devices communicate with the gateway over Bluetooth.
Ethernet carries BACnet/IP, Modbus or MQTT data to the BMS layer.
ROUTE 02
LoRaWAN Wireless Device Route
A practical retrofit route for legacy buildings or projects with wiring constraints.
LoRaWAN devices
⇄
LoRaWAN gateway
⇄
BMSBACnet/IPCloud
BACnet client or BMS
Wireless field data, translated for the BMS.
ConnectivityEthernet · Wi-Fi · Cellular
PowerUSB Type-C · PoE
Network serverCloud-based or embedded
Main functions
Converts LoRaWAN data into BACnet points.
Supports multiple Koolmesh or third-party LoRaWAN devices.
DESKTOP MOUNTING
Flat-surface placement
A flexible option for open areas and service spaces.
WALL / CABINET MOUNTING
Bracket installation
Suitable for a protected and discreet installation.
Why LoRaWAN?
LoRaWAN® is a long range, wide area and low-power networking protocol.
Wide coverageLow power consumptionHigh capacityEnhanced security
ROUTE 03
FIN-based Supervisory Route
A ready-to-use building control system built for real project delivery, supporting fuller Koolmesh BMS deployments, pilot-to-scale projects and wider building integration.
M-BUSWI-FI2 × RS-4852 × ETHERNET
Multi-Protocol Integration
Supports BACnet MS/TP & IP, Modbus RTU & IP, M-Bus and more.
Hotspot Wi-Fi Configuration
Built-in hotspot Wi-Fi enables quick local configuration and commissioning.
Flexible IO Expansion
Supports expansion modules for analog outputs, universal inputs, digital outputs and resistive sensors.
DIN-Rail Mounting
Designed for installation inside electrical panels or control cabinets.
Flexible Power Supply
Operates with 12–24V DC/AC input for wider installation compatibility.
Data Tracking and Analysis24-hour View SupportScheduleAlarm
Why choose the Hytronik Edge Controller?
The proven FIN5 engine, enhanced with Koolmesh integration and Hytronik project support.
Proven FIN5 Engine
A reliable software foundation for BMS integration and control.
Pre-Integrated Controller
Designed for Koolmesh BMS, rather than supplied as a bare platform.
Wireless Device Access
Connects Koolmesh wireless sensors, gateways and room devices.
Easier Commissioning
Simplifies setup, mapping and handover.
One Supplier Support
Hardware, field devices and integration guidance from Hytronik.
Lower Project Cost
Reduces engineering time and whole-life cost.
Secure Access. Operational Support.
Fits perfectly into a controls cabinet.
Remote secure access
Via FIN Edge2Cloud or the local network.
Secure local-network access
Hosted in Europe for engineering and operation.
Edge2Cloud
Fully browser-based user interface for engineering and operation.
What if the gateway or cloud goes down?
Control is executed at terminal level. A Bluetooth mesh distributes logic across nodes, so local lighting control continues if the gateway or cloud is unavailable. LoRaWAN devices communicate through their gateway, so resilience must be handled in the project design.
Bluetooth Mesh
Local logic and scene control keep working independently of cloud supervision.
LoRaWAN Layer
Gateway-dependent communication is addressed through system architecture and operational planning.
Encrypted Channels
Encrypted communication and secure device commissioning across every layer.
Role-based Access
Operator, integrator and administrator roles with scoped permissions.
Signed Firmware & OTA
Signed firmware and controlled over-the-air updates.
Network Segmentation
Separation between field, integration and supervisory layers.
COMPATIBLE PRODUCTS
Choose the right gateway or controller for the integration route.
Connect Koolmesh Bluetooth Mesh, LoRaWAN devices and building systems through the gateway or controller that fits the project.
.webp?ts=1787714911)
.webp?ts=1787714915)
.webp?ts=1787714917)
.webp?ts=1787714907)
LoRaWAN devices
LoRaWAN gatewayBACnet client or BMS
M-BUSWI-FI2 × RS-4852 × ETHERNET
.webp?ts=1787714910){kind=logo}
