One-key Commissioning & Twi-light Mode

⚠️ Real-World Problem: Setup Takes Too Long, and Not Every Application Needs Motion Detection

In large lighting projects — whether it's an office, warehouse, school, or parking area — setup can be a tedious task.
- Installers often need to apply identical settings to dozens of sensors (same hold time, standby dimming, daylight threshold...).
- In some scenarios, motion sensing isn't even needed — daylight response alone would do the job.

🧠 That’s why Hytronik designed two time-saving, problem-solving features, available with the HRC-11 remote controller:

🛠️ One-key Commissioning: Configure Multiple Sensors in Seconds

Installing several sensors in the same area? It’s time-consuming to set each one manually — and easy to make mistakes.
One-key Commissioning solves this by letting you copy a complete setting profile and apply it to other sensors with a single press.

💡 How it works:

1. Press the “Start” button on HRC-11.
2. Configure one “master” sensor:
   • Detection Range
   • Daylight Threshold
   • Hold Time
   • Standby Time
   • Standby Dimming Level
3. Press “Memory” to save the settings.
4. Walk to other sensors → press “Apply” → done!

🚀 Key Benefits:

• 🔄 Mass-apply identical settings quickly
• ⏱️ Cut setup time dramatically
• ⚙️ Ensure consistent performance across zones
• ✅ Avoid errors from manual repetition

Perfect for:

🏢 Open-plan offices | 🏭 Warehouses | 🏫 Classrooms | 🅿️ Car parks

🌙 Twi-light Mode: Let the Sun Take Control

What if your lighting doesn't need motion detection? In some cases, motion-based triggers cause unnecessary on/off cycles — or just aren’t relevant.

Twi-light Mode disables the motion sensor but keeps the daylight sensor active. This allows the light to switch based purely on ambient natural light levels.

🌅 What Twi-light does:

• Motion detection: ❌ Off
• Daylight sensing: ✅ On
• Enables:
  • 🌇 Dusk-to-dawn switching
  • 🌤️ Daylight harvesting

📍 Ideal for:

🪟 Storefronts or open atriums with ample daylight | 🛣️ Corridors or pathways where motion is constant | 🧘 Spaces that need smoother, daylight-driven transitions

✅ Why it’s great:

• Just press the “Twi-light” button on HRC-11
• Keeps logic simple and effective
• Reduces unnecessary on/off cycles
• Boosts energy efficiency without complexity